 |
|||||||||||||||||||||
|
Let's take a look at the steps required to
install a notebook memory module. Don't worry, it really isn't that difficult,
nor do you require the dexterity of a surgeon to do it. Step 1: Power Down the Machine The first and very important step is to always,
always be sure to power down the laptop. If you open up the laptop while it is
still powered up, you risk having components being shorted and destroyed. So
shut down the computer and ensure that there are no power lights on.
It's useful to learn how to
install laptop memory yourself Step 2: Locate the Memory Access Panel The next step here is to locate the memory
access panel. Usually, you can find this located on the bottom of the laptop.
What you need to do is to refer to the laptop manual and see where this panel
is. Step 3: Remove the Access Panel Next up, remove the screws from the access
panel. Then slowly lift and remove the access panel itself. On some laptop
models, you may find that the panels may slide out of the case. On other models,
they might rotate away. Step 4: Secure the New Memory Module The next thing to do is to align the notch of
the notebook memory module with that of the laptop's memory slot. Now, slowly
and gently insert the memory module into the slot. Usually, you should try to do
it at a 45 degree angle. Don't force the module in, just slide it in gently.
Usually there are clamps in the slot to secure the module - once the module is
in, you should clamp it down with these clamps.
Carefully secure the new memory
module into the laptop Step 5: Replace the Memory Access Panel Next thing you should is to close up the access
panel. Just follow Step 3 in the reverse order (where you opened the panel).
Line up the individual screw holes and get ready to fasten the panel to the
case. Step 6: Fasten the Access Panel to the Case You're almost there. Locate the screws used to
fasten access panel the case. Next, just use a proper screwdriver and tighten
those screws - but don't use too much force or you might exert undue force on
the laptop. Step 7: Power Up the Laptop Great! With the access panel has been securely
fastened, you have finished installing the notebook memory module. What you
should do now is to power up the laptop and make sure the new RAM has been
detected by the BIOS. Refer to the user manual to see how to do this. ConclusionYou should now have a good grasp of how to install notebook memory modules. The next time you purchase notebook memory modules, just follow the above steps and installation should be a breeze. Until next time, good luck and happy mobile computing!
This ebook package contains excellent tips for topics like buying and using a laptop, preventing laptop theft, extending battery life, laptop ergonomics and much more. Related ArticlesYou may also wish to read the following related articles:
Top 5 ultraportable laptops
© 2010 Best-Laptop-Guide.com
|
|
|
|
|||||||||||||||||
Searching For Good Laptop Advice?
